... NOTE TO READERS: Heavy Post. If you don't want to read all of this I understand! Just look at the pictures - it's quite a metamorphosis!
...I started my Fearless February project on January 19th because I knew I needed a head start. But really, what does it matter - After all I'm not in a speed race. But I have to continuously remind myself to CHILL and just ENJOY the process of what this project is all about:
- shaking up my regular sewing routine by stepping out of my comfort zone
- practicing and thus improving my tailoring techniques
I actually do not get in as much sewing time during the week as I would like to. Lets face it I'm pooped at the end of the day. Sewing a little on Friday evening and all day on Saturdays has been progressive though. Had I made this jacket straight by the pattern instructions it would have been finished by now. But it wouldn't be as special as it's going to be after plugging numerous tailoring techniques into it.
There have been other eyes (people) involved in this process. My sister Pat and my niece Brenda came for a visit at the beginning of the muslin fitting stage. They helped me critique my fit as much as they could but most importantly took pictures of the back of the muslin while I was wearing it. I emailed the picture to
Smoking Needles, who suggested that the sleeves needed to be raised because they extended far too much over my natural shoulder; and that it was too big in the chest area. And after studying this picture I also knew that I also needed to make a sway back alteration.
 |
| Glad I already knew how to make the sway back adjustment. I also made an adjustment for the pulling at the top of that center back seam. |
Eight pairs of eyes lead to a much better fitting muslin, but it was at this point that I was almost ready to throw in the towel because I really wasn't sure how to go about raising the sleeves or taking the excess fullness out of the chest area. But instead I took a deep breath and decided to press on. After all, it's not a Challenge unless it's a Challenge, RIGHT???
 |
| Much too over extended in the shoulder area |
 |
| I'll admit, not a pretty sight! |
 |
| Ahhhh, much better!, but also found that the sleeves were much too big overall |
My corrections made for a much better fit. You can see from the picture that even on the dressform it was too large in the lower armhole area. I could have taken the excess out of the side seams, but nooooo, I had already jumped the gun and completely installed all 3 pocket flaps (lining, topstitching and superb pressing). There was no way I was taking them off because as far as I was concerned they were PERFECT! Taking up the side seam would have thrown my pocket flap alignment off. So instead I decided to make the adjustment in the back princess seams, which I think worked out very well.
I insert the majority of my sleeves flat before the side seams are sewn. I JUST LOVE THAT METHOD OF CONSTRUCTION! But of course this jacket has a two piece sleeve so there was no way around setting it in.
If anyone out there knows a way to sew a two piece sleeve in flat, please let me know!
The sleeves were the #1 area that caused me fear - I'm a-scared (new made up word) of sleeve cap puckering. I received advise from two different sources and help from a video tutorial. Ebony said that although pattern instructions tell you to ease the sleeve cap between the notches, instead start your easing far beyond the notches. This was good advice, except it was impossible to pull up the ease stitches in this thick fabric! I used three rows of ease stitches and it wouldn't budge. It was now time to pull another weapon from the arsenal - the bias strip sleeve cap easing method. I'd used it before a long time ago and used this You Tube Video as a refresher. It worked like a charm!
With the sleeve cap eased, I still needed to get the sleeves inserted flawlessly. It was then that I heard Rochelle's voice in my head from a previous conversation say, "have you ever thought about hand basting the sleeve in first?". Let me tell you, that really did the trick.
 |
| 1" Bias strip taken from the inside of an old thrifted necktie |
 |
| Not a pucker - IT'S FLAWLESS!!! |
 |
| I think it's beautiful - I DETEST PUCKERING unless of course it's a pattern design. |
|
|
 |
| Gratuitous picture of the back of the jacket. |
I am extremely pleased with my project at this point, but still not completely out of woods. The pattern calls for 1/2" shoulder pads, but I'm not sure that will be enough. I'm toying with making headers for the sleeves.
When I get to this point of a big project I make a list of what's left to do. I guess it helps me feel like I'm moving and making some progress.
It's been rough sewing this thick wool fabric. I had to pull out the big guns to get this done.
I purchased this machine about four years ago at Hancock's used machine sale for $35.00; all it needed was a needle thumb screw. I use it for "hard" to sew fabrics and boots so it rarely sees the light of day. But I'm discovering that I really like it. No bells or whistles on this machine at all but it purrs like a kitten.
In the meantime, I was one of
Brenda's pattern give-a-way winners. Thank you again Brenda!
To end this short novel of a post I must show a couple of pictures of my students. We participated in the Veteran's High School Prom Fashion Show for the second year in row and they did marvelously.
 |
| My 2013 Dream Team |
